Setting BIOS for Windows Installation

 SETTING BIOS - PART 1 - PART 2 

This post will show how to set up your bios to install any windows for your PC/Notebook. The purpose is to change the BIOS setting to boot from CD/DVD so after you restart your system your PC/DVD automatically detect the Windows CD/DVD you inserted in the CD/DVD ROM.

BIOS is differ from one model to another model, so here is some example.


HOW TO CHANGE BOOT ORDER

image from: http://www.password-reset.com

when you start you laptop you will see the post screen, notice the picture above, Press F2 to Enter Setup, mean you have to press F2 to open BIOS. In other machine for example my desktop i have to press DEL(delete) to enter BIOS.

Ten a screen like picture below will appear:

Now, on top you should have a menu, or multiple menu, on the picture above show that only boot menu, just find the boot menu, in some other machine, it menu may differ such as BOOT CONFIGURATION , BOOT PRIORITY, and others, here just change the 1st boot is set to DVD-ROM, in the picture above notice that the DVD is in the third boot device label with [ATAPI: CD-ROM], change it to the 1st boot order.

Then press F10 to save and hit enter to save the configuration.

A-Note Drivers Acer Drivers Alienware DriversApple DriversAsus Drivers-BenQDrivers Clevo Driver Compaq Drivers Dell Drivers DTK Drivers HCLDriver How-To HP Drivers Lenovo Drivers LG Drivers Medion Driver MSI Drivers NEC Drivers nVidia Drivers Packard Bell DriversPositivo Drivers SaharaSahara KN7 Samsung Drivers Single Driver Sony Vaio Toshiba Drivers